Compiling GMIN with CHARMM
So, you want to get the latest version of GMIN from the Wales Group repository. The GMIN code is managed by Subversion version control (SVN), and before you can access it, you need an account on the departmental SVN server.
Getting an account on the SVN server
The SVN server we use is run by the good people in the Unilever Centre, so you should email ucc-support@ch.cam.ac.uk, CCing in David (dw34) to request access to the Wales Group repository. Make sure you include your CRSID, the bit before @cam.ac.uk in your email address.
Once they reply, you should be able to set up your password here after logging into Raven. To check you have access to the repository, try logging in here. If you can't, you've done something wrong! Get help!
Setting up your SVN details
Open a shell on the machine where you plan on using GMIN. To make subversion easy to use, you need to specify some locations in your .bashrc file as environment variables. We do this as follows:
vi ~/.bashrc
This opens the vi editor. Press SHIFT+G to go to the bottom of the file, then press I to enter insert mode. Add the following to the bottom:
export SVN=https://wwmm.ch.cam.ac.uk/svn2/groups/wales/ export MYSVN=https://wwmm.ch.cam.ac.uk/svn2/users/CRSID/
where CRSID is the user name you use to log into Raven with. When you're done, we need to save he changes, press ESC to exit insert mode (check 'Insert' isn't still showing at the bottom!) and then type:
:wq
and press ENTER. This should exit the editor, and return you to the directory you were in before. These variables will now be automatically set when you open a new shell, but for now, we need to load them manually. We do this using the source command:
source ~/.bashrc
We're now ready to check if you have access to the repository from your chosen machine. Lets try listing the contents of the GMIN trunk directory. Type the following ($SVN is the environmental variable we set to the location of the Wales Group repository above):
svn ls $SVN/GMIN/trunk
You will be prompted to validate a security certificate so press p and then ENTER to accept it permenantly. Now enter the password you set above (you only need to do this once!). You should see the files that make up GMIN displayed, ending in something like this:
... wenzel.f wham_djw.f90 zwischen.f
NOTE: The 'trunk' contains the non-developmental version of GMIN.
Finally, before you download the code, you need to set up the log file template. This ensures that everyone submitting changes to the repository writes their log files in a similar fashion. Firstly, we need to edit the SVN config file
vi ~/.subversion/config
There is a section in the config file that begins as follows:
# [helpers] # editor-cmd = editor (vi, emacs, notepad, etc.)
This should be changed to the following:
[helpers] editor-cmd = vim +"r ~/template"
This tell subversion to open the file /home/CRSID/template when it asks for a commit log message to be written. Lets create this file now
vi ~/template
Enter insert mode by pressing i and paste the following into vi:
SUMMARY OF CHANGES ------------------ SUBROUTINES AFFECTED -------------------- KEYWORDS AFFECTED ----------------- KNOWN ISSUES ------------
Save the file by pressing ESC and then typing :wq. You're now good to download the GMIN code :)
'Checking out' the GMIN code
The first time you want to access the code, you need to 'check it out'. This will pull the entire code from the repository into a local directory for your use.
WARNING: It has been found that if you put the GMIN directory too far from your /home/CRSID/, you will not be able to compile the CHARMM source that is included. This is most likely due to the variable CHARMM uses to contain the locations of files is of a limited length! We hope to fix this problem, but for now you need to ensure it is close enough. The path below is the MAXIMUM length that allows CHARMM to still compile, adding one more x to the GMIN directory name leads to all sorts of silly errors!
/home/csw34/GMINxxxxxxxxxx/
The code is checked out as follows:
svn co $SVN/GMIN/trunk ~/GMIN
Notice that I'm transfering the code to:
/home/csw34/GMIN
This path is clearly shorter than that above, and so we should have no problem compiling CHARMM. You'll need to wait a while for the code to transfer! Once it has finished, you'll see a message like this:
Checked out revision 9853.
The number given is the version number you have just obtained. Whenever changes are make to the code and uploaded to the repository, this number is incremented. It might be increased by more than one between versions as the counter is common for all software, not just GMIN. That's it! You now have a copy of the GMIN code. Here are a few notes on its structure for new users.
- CHARMM31 contains the CHARMM source code. You need to compile CHARMM before you compile GMIN with it, and you must use the same compiler in both cases. If you don't you'll get errors.
- CHARMMinterface contains the CHARMM interface files which link GMIN to the CHARMM source. We try to change the CHARMM source itself as little as possible, so most changes are made here.
- AMBER contains the AMBER9 source code.
- AMH contains the files used for the AMH potential as implemented by Dr Mike Prentiss.
- LAPACK and BLAS contain highly optimised maths algorithms used by GMIN.
Compiling CHARMM
As an example, lets compile GMIN with CHARMM from the code we just obtained. Before we do so, we need to compile CHARMM itself. Before we start, we need to make sure the right compiler is loaded. For this example, lets use a 64bit Portland compiler, which at the time of writing is done using the command
module load pgi64/7.1-6
If you get a conflict error message, you already have a version of pgf90 loaded and need to swap it out, for example:
module swap pgi64/6.1-6 pgi64/7.1-6
NOTE: These module names are from the mek-quake server and are NOT called the same thing on clust. You can see all possible modules availiable to load using
module av
Once the compiler is loaded, change to the CHARMM31 directory using
cd CHARMM31
CHARMM is compiled by a series of scripts which we run using a few simple commands. Firstly,
./clean.csh
removes any files from a previous CHARMM installation. The installation is then started using
./compile.csh
It takes a while...so if you see it finish quickly, within a minute - you probably have problems! You can check by using
tail build.log
You should get something like this if all is well:
install.com> Phase 2 completed.
install.com> Processing CHARMM source on gnu...
install.com> CHARMM Installation is completed.
The CHARMM executable is /home/csw34/GMIN/CHARMM31/exec/gnu/charmm.
install.com> Phase 3 completed.
Tue Jul 1 20:46:11 BST 2008
If you do, congratulations! You have just compiled CHARMM :)
Compiling GMIN with CHARMM
Now it's time to compile GMIN itself. Before we do so, we need to ensure we have set the Makefile up correctly. The Makefile specifies how the code should compiled and then linked together. When you first open it, it looks pretty horrendous, but that's just becuase there are so many options contained within. Any line starting with a # is commented out and will not be used. Scroll down until you come to the section titled AMBER9. Two variables (AMB9SRC and SANDERSRC) are defined below and you need to update them to reflect the location of the code you just downloaded. Remember, you must use the FULL path here, so no ~'s!
In my case, I need to set the variables as follows:
AMB9SRC = /home/csw34/GMIN/AMBER SANDERSRC = /home/csw34/GMIN/AMBER/src/sander
In the CHARMM31 section, I am also going to set
C31SRC = /home/csw34/GMIN/CHARMM31
This variable specifies the location of the CHARMM source that will be used in the GMIN compilation. If you are compiling with AMBER, everything in the CHARMM sections should be commented out! Finally, I need to check that the correct bits are uncommented for the Portland compiler, pgf90. In the Makefile provided, they are. I now need to ensure that I have the correct compiler loaded, which at the time of writing is done using the command
module load pgi64/7.1-6
If you get a module conflict error message, you already have a version of pgf90 loaded and need to swap it out, for example:
module swap pgi64/6.1-6 pgi64/7.1-6
NOTE: These module names are from the mek-quake server and are NOT called the same thing on clust. You can see all possible modules availiable to load using
module av
Right! Lets try compiling some code! First, we want to make sure there are no random files lurking in the repository from a previous compilation. We do this using
make clean
If you get an infinite loop going on, exit using CTRL+C to escape and double check the variables we set above point to the right places! To compile GMIN with CHARMM, we then use the command
make cgmin2
Cross your fingers! At present, there are some problems compiling with CHARMM and you'll see some linking errors at the end of the compilation like this:
/usr/bin/ld: Warning: alignment 16 of symbol `mdi_' in /home/csw34/GMIN/CHARMM31/lib/gnu/minmiz.a(tnpack.o) is smaller than 32 in commons.o
Don't worry about this! They are the result of a naming clash between AMBER and CHARMM and will be resolved soon :) Unless you see any other errors, congratulations! You should now have a CGMIN executable in the GMIN directory! Go test it!
Checking you have the lastest version
If it has been a while since you downloaded the code, it is likely that you don't have the latest version. This could mean than the code you have contains bugs which have been fixed, or is missing performance or functionality increases that were added recently. You can easily see recent changes to the code either by looking at the RSS feed for the trunk here (note that you can see the differences between each revision and the one previously by clicking on the revision name), or using the SVN log command:
svn log $SVN/GMIN/trunk
Note that by default svn commands operate on the working copy (BASE). svn log in a working directory will therefore show commits up to your last update. See the SVN_Page for more details. --james 15:38, 3 July 2008 (BST)
You can then update your code without having to download everything again using the update command.
WARNING!: You must be VERY careful using this command! If you have changed your code and not committed those changes to the SVN repository, updating will make SVN merge your code with that in the repository. More will be written about this when it has happened a few times!
Note: you cannot actually commit your code without updating unless your BASE matches the HEAD of the repository (i.e. no-one else has committed since you updated). This is to avoid you committing code which over-writes someone else's work.--james 15:38, 3 July 2008 (BST)
While in the GMIN directory, simply type
svn update
You will then be shown which files have been added, changed or removed and finally told which version number you now have. Committing and merging changes is covered on the SVN Page.